Codice | BMS01S05-1S |
---|---|
Produttore | Redox |
Famiglia | Litio Ione Ricaricabile, LiFe04, Litio Polimeri |
Tipo | 1 Serie |
Tensione | 4,25V/2,5V a cella |
Capacità | 5A max cont. discharging current |
Dimensioni | 17,5×17,5mm |
Note | PREZZO SPECIALE SULLA SCHEDA DI CONTROLLO SE LA PRODUZIONE VERRA’ ESEGUITA PRESSO I NOSTRI LABORATORI |
Protection Circuit Module Specifications For 3.2V LiFePO4 Battery Pack |
||||||
|
||||||
No |
Test item |
Criterion |
||||
Lifepo4 |
Li-ion/Li-polymer |
|||||
1 |
Voltage |
Charging voltage |
DC3.6VCC/CV |
DC:4.2V CC/CV |
||
Balance voltage for single cell |
……. |
……. |
||||
2 |
Current |
Balance current for single cell |
……. |
……. |
||
Current consumption for single cell |
≤10μA |
≤10μA |
||||
Max. continuous charging current |
5A | 5A | ||||
Max. cont. discharging current |
5A | 5A | ||||
3 |
Over charge |
Over charge detection voltage |
3.9V±0.025V (optional) |
4.28±0.025V (optional) |
||
Over charge detection delay time |
0.5-2.0S |
0.5S—2.0S |
||||
Over charge release voltage |
3.80±0.05V |
4.05/4.10 ±0.05V |
||||
4 |
Over discharge |
Over discharge detection voltage |
2.0±0.05V (optional) |
3.0±0.05V (optional) |
||
Over discharge detection delay time |
10-300mS |
10-300mS |
||||
Over discharge release voltage |
2.3±0.05V |
3.0±0.1V |
||||
5 |
Over current |
Over current detection voltage |
depend on the |
depend on the |
||
Over current detection current |
final data fixed from actual test |
final data fixed from actual test |
||||
Detection delay time |
5-20ms |
5-20ms |
||||
Release condition |
Cut load, Auto release |
Cut load, Auto release |
||||
6 |
Short |
Detection condition |
Exterior short circuit |
|||
Detection delay time |
100~500us |
|||||
Release condition |
charge up |
|||||
7 |
Resistance |
Protection circuitry |
≤50mΩ |
|||
8 |
Temperature |
Operating Temperature Range |
-40~+85℃ |
|||
Storage Temperature Range |
-40~+125℃ |
|||||
9 |
Dimension |
¢17.5mm |
||||
Optional |
Over charge detection voltage (V) |
3.9V±0.025 |
4.25±0.025 |
4.3±0.025 |
4.325±0.025 |
|
Over charge release voltage(V) |
3.80±0.05 |
4.05±0.05 |
4.1±0.05 |
4.075±0.025 |
||
Over discharge detection voltage |
2.0±0.062 |
2.5±0.062 |
2.4±0.1 |
2.5±0.05 |
||
Over discharge release voltage(V) |
2.0±0.062 |
2.5±0.062 |
3.0±0.062 |
2.9±0.05 |
Codice | BMS01S05-1S |
---|---|
Produttore | Redox |
Famiglia | Litio Ione Ricaricabile, LiFe04, Litio Polimeri |
Tipo | 1 Serie |
Tensione | 4,25V/2,5V a cella |
Capacità | 5A max cont. discharging current |
Dimensioni | 17,5×17,5mm |
Note | PREZZO SPECIALE SULLA SCHEDA DI CONTROLLO SE LA PRODUZIONE VERRA’ ESEGUITA PRESSO I NOSTRI LABORATORI |
Puoi essere il primo a commentare “CIRCUITO DI PROTEZIONE PER BATTERIA LITIO – BMS01S05-1S 5A”
Devi essere connesso per inviare un commento.
-
€ 20.00
iva escl.
Batterie Litio Ione ICR18650 3,7v 2.600mAh con PCM connettore: Molex 51021-2P – ICR18650-26-1S1P
-
€ 35.00
iva escl.
Batterie Litio Ione ICR18650 7,4v 2.600mAh con PCM – ICR18650-26-2S1P
-
€ 55.00
iva escl.
Batterie Litio Ione ICR18650 11,1v 2.600mAh con PCM – ICR18650-26-3S1P
-
€ 55.00
iva escl.
Batterie Litio Ione ICR18650 14,8v 2.600mAh con PCM – ICR18650-26-4S1P
Non ci sono ancora recensioni.